Eccentric Reducer Forming Process

eccentric swage reducer (harga concentric reducer) is a kind of pipe fitting for pipe diameter. The forming process usually adopted is reducing pressing, expanding pressing or reducing and expanding pressing. For some specifications of jual reducer concentric, stamping can also be used.
Reducing/expanding forming
The reducing forming process of ms concentric reducer is to put the tube blank with the same diameter as the large end of non concentric reducer into the forming die, and press along the axial direction of the tube blank to make the metal move along the die cavity and shrink to form. According to the size of the pipe reducer stainless steel variable diameter, it is divided into one-time pressing forming or multiple pressing forming.
Stamping forming
In addition to using steel pipe as raw material to produce ss concentric reducer, some specifications of ss reducers can also be produced by steel plate by stamping forming process. The shape of the die used for stretching is designed with reference to the inner surface size of stainless cone reducer, and the steel plate after cutting is stamped and stretched by the die.
Before bonding stainless reducers, wipe the socket side and the outside of the plug with a dry cloth. If there is oil on the surface, wipe it clean with acetone. The following points should be noted:
1. Control caliber: DIN standard (DN10-DN150), 3A/IDF standard (1/2"-6"), ISO standard (Ф12.7-Ф152.4);
2. International industrial standards: DIN, ISO, SMS, 3A, IDF, etc.;
3. Product materials: stainless steel 304, 316, 316L;